Uberhaus 68125104 ECH110 Guide De L'utilisateur page 7

INSTALLATION INSTRUCTIONS
7. Run the electrical supply cable up to the wiring compartment of the unit. Provide
a sufficient length of wire to facilitate the connections, which are made while the
unit is still hanging from the bracket.
8. Make the electrical connections using the supplied wire connectors (marrettes).
Connect the ground wire to the grounding screw. Make sure all connections are
secured and tight. (For a 2-wire installation, connect the F and L2 wires to one
of the power supply leads and connect the L1 wire to the other power supply
lead. Note that the Fan mode option will not be available with this type of
installation.)
9. Replace the wiring compartment cover. Swing the other half of the interior
assembly into position and screw the assembly to the bracket with the screw(s)
previously removed in step 2.
10. Replace the external cover and screw it into place with the four screws removed
in step 1.
11. Test the unit to make sure it is running properly.
6