Installation Instructions
EXHAUST HOSE
INSTALLATION:
The exhaust hose and adaptor must be installed or removed in
accordance with the usage mode:
COOL or AUTO mode
FAN or DEHUMIDIFY
mode
1. Install the window exhaust adaptor onto the exhaust hose as shown
in. Fig.18. Refer to the previous pages for window kit installation.
2. Insert the exhaust hose into the rear air outlet opening along the arrow
direction (See Fig.19).
The hose can be compressed or extended moderately according to the
installation requirement, but it is desirable to keep the hose length to a
minimum.
DO NOT OVER BEND THE HOSE. (see Fig.21)
Fig.18
13
IMPORTANT
Fig.19
Install
Remove