Power Outage; Air Flow Direction Adjustment - Danby Designer DPA110B2WDD Guide D'utilisation Et Soins De Propriètaire

Operating Instructions
OPERATING MODES
(con't)

POWER OUTAGE

AIR FLOW DIRECTION
ADJUSTMENT
SLEEP Function
Simply press the sleep button. When in cooling mode, the temperature
will increase by 1°C / 2°F every half hour for 1 hour. The unit will then
hold this new temperature for 7 hours before returning to the original
temperature setting and resuming normal operation.
NOTE: This feature is unavailable in FAN and DRY mode.
In case of a power outage or interruption, the unit will automatically re-
start in the default settings after the power is restored.
Wait 3 minutes before resuming operation
After the unit has stopped, it can not operate for 3 minutes. This is to pro-
tect the unit. Operation will automatically start after 3 minutes.
Adjust the air flow direction automatically (Fig. 4):
- The louver can be adjusted automatically, to change the airflow
direction. (Fig.4)
- When the power is ON, the louver opens fully.
- Press the SWING button on the panel or remote controller to initiate the
Auto swing feature.
- The louver willl swing up and down automatically.
Please do not adjust the louver manually.
Swing automatically
9
Fig.4