The screen is to be assembled and disassembled by authorized persons only.
Incorrect installation or assembly can cause severe damage and/or injuries.
You must be extremely cautious when moving the EasyViewer/Quartz.
The EasyViewer/Quartz must not be picked up by the screen, the front
panel, the light casings or the slide table. Always block the height
adjustment with the supplied orange screws.
MAINTENANCE INSTRUCTIONS
•
Occasionally clean the screen and the lens using a damp cloth. For further instructions: check the
screen manual.
•
Treat your device with care and you will enjoy it for years to come.
Chapter 2 : Installation
The EasyViewer/Quartz is solely to be installed by authorised personnel. You can find a list on
www.kobavision.be
KOBA Vision EasyViewer/Quartz
WARNING
20