Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
ON/OFF switch
2
Switch computer/Quartz
3
Press: on/off spoken buttons
Turn in colour mode: brightness
Turn in positive or negative reading : improve
background
4
Press briefly: switch between photo mode, negative,
positive reading
Hold button: changes colour of the background or
characters
6
Turn: zoom in/zoom out
Press: overview/magnification
8
Turn: set the position of the line or bar
Press: switch between line, bar or none
Press and turn: adapt the line colour or adapt bar width
9
Turn: adjust lighting
SWITCHING ON/OFF
The device is switched on with button 1. Most screens are switched on by the EasyViewer/Quartz.
If this is not the case, switch on the screen as well (see screen manual).
The EasyViewer/Quartz is switched off with button 1. Some screens switch off the
EasyViewer/Quartz when they are switched off.
After switching on, an on-screen bar shows the start-up progress. The EasyViewer/Quartz
indicates when it is ready to be used by telling "the device is ready for use".
LANGUAGE OF THE SPOKEN HELP MESSAGES
Attention! This menu will pop-up when initializing the unit for the first time.
Step 1: Language of the spoken assisting messages
This is where you adjust the language of the spoken buttons. You choose your mother tongue. An
inhabitant of France chooses French. By turning the button 6 you choose the language. Hold
button 4 to go to step 2.
Step 2: Preferred voice
Most languages have several voices. In step 2 you choose your preferred voice for the spoken
buttons and your preferred voice for reading out the texts by turning button 6. Usually you can
choose between a male and female voice. In French, for example, you can choose between
Virginie, Thomas, Felix and Audrey. You select the language by turning the big knob. By holding
button 4 you will exit the menu.
KOBA Vision EasyViewer/Quartz
22
Publicité
Table des Matières
