Assembly, Set-Up And Connection - Bartscher 2000D I Mode D'emploi

•
Do not move or tilt the device when in operation.
•
Never touch the device with moist or wet hands.
WARNING! Burn hazard!
Some parts of the device heat extensively during use. Do not touch in order to
avoid injury!
•
Never touch the patio heater directly. Also following usage, use caution, the patio
heater needs approx. 15 minutes to cool.
•
Do not expose the device to extreme weather conditions (tempest, rain, snowfall,
storm etc. ).
•
Do not cover the patio heater with towels or blankets.
•
Do not place any inflammable materials or objects near the patio heater.
•
Do not leave unattended children by the patio heater. Do not leave device unattended.

5.2 Assembly, set-up and connection

•
Unpack the device and remove all packing material.
Assembly
WARNING!
Connect device to electrical grid only following installation!
1. Insert the lower pipe stand
and fasten using 4 M6x30 screws
power supply conduit pin
⑪
stand (ill. 1).
⑪
into the base
⑮
.install the
⑫
by the lower pipe
⑯
⑭
⑫
⑪
⑮
⑯
- 23 -