Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
3 .
attachinG and connectinG the eleMents
Monitor installation
1-Fixing the installation steel
position on the wall by using
2-Connecting the wires and Power at the back of Monitor;
3-Fixing the indoor monitor on the steel panel.
do not expose the screen where in direct sunlights, to protect the tFt
lcd screen and avoid poorvie wing result.
recommended installation height of the Monitor: 1.5M
street panel installation
1-Make a hole in the wall according to the size of the fixing plastic
box (embeding box).
2-Panetrate the wires through the plastic box and fix the box in the
hole.
3-Take out the fixing parts of the outdoor camera.
4-Screw on the outdoor camera with the embedind box (do not
forget the water-proof rubber
and the embeding box).
5-Fix back the plastic fixing parts.
the outdoor station shall be installed where there is protection for
direct sun lights and rain.
recommanded installation height: 1.5M
NOTICE DF-629-TS V0514 IndA.indd 12
panel for the monitor
on the right
expansion screws.
membrane between the camera
1.
2.
output camera
3.
4.
1.5m
1.5m
1.5m
a. indoor monitor
B. outdoor camera
c. Power adaptor
d. electrical lock
5.
6. lock output
07/05/2014 17:36:52
Publicité
Chapitres
Table des Matières
