Do-It-Yourself Maintenance Oven Door Removal; To Remove Door; To Replace Door - Fulgor Milano F4SP30 1 Série Manuel D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour F4SP30 1 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Make sure oven is cool and power to the oven has been turned off before removing the door. Failure to
do so could result in electrical shock or burns.
The oven door is substantial. Use both hands to remove the oven door. The door front is glass of which
there are 4 panes.
Handle carefully to avoid breakage.
Grasp only the sides of the oven door. Do not grasp the handle as it may swing in your hand and cause
damage or injury.
Failure to grasp the oven door firmly and properly could result in personal injury or product damage.

To Remove Door

1. Open the door completely.
2. Flip the hinge security clip on each hinge towards
you (1).
3. Hold the door firmly on both sides using both
hands and close the door until you feel it stop at
the security clip.
4. Hold firmly; the door is heavy. Lift and pull towards
you - you may have to play with it a little to feel the
hinges disengage from the oven frame.
5. Place the door in a convenient location.
(a)
Do-it-Yourself Maintenance
Oven Door Removal
WARNING

To Replace Door

1. Insert the upper arms (2) of both hinges into the
2. Move the hinge security clips (1) back into
3. Close and open the door slowly to assure that it is
(a)
slots (3). The recesses (4) must hook on the lips
(5).
position. If the security clips cannot be easily
moved back to their normal operating position,
ie. the clips hit the frame, then the door is not
correctly seated. Bring the security clips back out
and try to reseat the door - you will feel it clip in /
drop slightly when the hinges engage the frame
correctly.
correctly and securely in place.
(b)
(d)
(c)
(e)
Use & Care Manual
ENGLISH
27

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

F4sp30s1

Table des Matières