Before Initial Use; Safety Instructions; Disposal Of The Device (Environment) - Topcom SOLOGIC A811 Manuel D'utilisateur

1

Before Initial use

Thank you for purchasing this new desktop caller
ID telephone.
1.1 Intended Purpose
This product is intend to be connected indoor to
an analogue PSTN telephone line.
1.2 Caller ID
To use 'Caller ID' (display caller), this
service has to be activated on your
phone line. Normally you need a separate
subscription from your telephone
company to activate this function. If you
don't have the Caller ID function on your
phone line, the incoming telephone
numbers will NOT be shown on the
display of your telephone.
1.3 Connection
The CE symbol indicates that the unit
complies with the essential
requirements of the R&TTE directive.
This device has been designed and manufactured
to comply with the 98/482/EC rule, referent to the
Pan European connection of a terminal to the
Public Switching Telephone Network (PSTN) and
following the established guidelines by the 1999/
5/EC Directive about radio electric equipments
and the reciprocal acknowledge of their conformi-
ty. However, due to the fact that there are some
differences in the PSTNs from one country to an-
other, the verifying measurements by themselves
do not set up an unconditional guarantee for an
optimal working in every connection point to the
PSTN of any country. If any problem comes up,
get in touch firstly with the distributor.
In any case, use conditions for which the product
has been created should be respected as well as
avoid its use in public or private networks with
technical requirements clearly different to those
established in the EU.
Sologic A811
2

Safety instructions

Please read carefully through the
following information concerning safety
and proper use. Make yourself familiar
with all the functions of the equipment.
Be careful to keep these advice notes
and if necessary pass them on to a third
party.
• Do not place the basic unit in a damp room or
at a distance of less than 1.5 m away from a
water source. Keep water away from the
telephone.
• Do not use the telephone in environments
where there is a risk of explosions.
• Dispose of the batteries and maintain the
telephone in an environment-friendly manner.
3 Cleaning
Clean the telephone with a slightly damp cloth or
with an anti-static cloth. Never use cleaning
agents or abrasive solvents.
4 Disposal of the device
(environment)
At the end of the product lifecycle,
you should not throw this product
into the normal household garbage
but bring the product to a collection
point for the recycling of electrical
and electronic equipments. The
symbol on the product, user guide and/or box in-
dicate this.
Some of the product materials can be re-used if
you bring them to a recycling point. By re-using
some parts or raw materials from used products
you make an important contribution to the protec-
tion of the environment.
Please contact your local authorities in case you
need more information on the collection points in
your area.
Sologic A811
3