Making Coffee - gourmetmaxx A114 Mode D'emploi

Making Coffee

CAUTION!
■ Danger of burns from steam escaping! Never open the water tank cover when the
coffee machine is switched on. Also do not pour any water into the water tank while
it is hot! Hot steam or hot spray water may escape. Always switch off the coffee ma-
chine fi rst and allow it to cool down before you add any more water.
■ Danger of burns! The hotplate, the fi lter and fi lter holder are hot during the brewing
process and immediately afterwards. There may also be hot water inside the fi lter
and fi lter holder. Let the fi lter and fi lter holder cool down before you touch them.
■ Before you fi rst operate the device, make sure that the water tank cover is closed
and that the fi lter and the fi lter holder are inserted correctly so that the water can run
through the coffee powder without any problems.
■ Do not operate the coffee machine unattended so that you can intervene immediately
in the event of any malfunctions (e.g. overfl ow etc.). If the fi lter does overfl ow, switch
the device off immediately and allow the fi lter holder to cool down before you remove
it.
■ Never place an empty glass jug on a warm hotplate! The glass could be damaged.
You require fi lter paper bags of size 1 x 4.
The device has overheating protection which prevents the device from being
switched on again directly after a brewing process for safety reasons. After a
brewing process, you should therefore wait for a few minutes until the device has
cooled down before you start another brewing process.
1
2
3
25
1. Open the water tank cover (18).
2. Insert the fi lter holder (2) into the fi lter compartment (17).
Make sure that it fi ts properly.
3. Insert a fi lter paper bag of size 1 x 4 into the fi lter holder.
4. Pour in the quantity of coffee powder you want (generally
one heaped spoonful per cup).
EN