Qlima LK 2035 Manuel D'utilisation page 39

Masquer les pouces Voir aussi pour LK 2035:

Table des Matières

Les langues disponibles

If you fail to consult and/or follow up the

rules, instructions and explanation, the

warranty will no longer be valid, and the

manufacturer will no longer deal with

any damage to the appliance and/or your

environment under the warranty.

OPERATION GUIDE

Open the package and take the machine out. Check the content with on

Instruction Manual .

The unit should be placed on a level surface and must always stand in a verti-

caposition. Check the power supply of the correct rating. (Refer to the name-

plate located at the back side of the unit).

Filling water: When the machine is new or unused for a long period, it is

necessary to fill in clean water before using. Be sure to unplug the unit befo-

re filling water for preventing electrical parts from damage. Open the water

tank lock and pull out the water tank, then fill the water into tank.

Notice that the water does not exceed the maximum set level.

Storage: In case the unit is unused for a long time, the water tank should be

drained out and keep the unit running with fan only for a period. Especially

the strainer should be entirely dry. Pack it with plastic bag and

put it in box.

FUNCTIONS OF ALL BUTTONS

Connect in the power, the initial power-on buzzer issued "Pi" sound, the power

indicator light red enter standby state.

SWITCH: Press the power button with sound "PI-", the unit starts from medium speed.

After 3 seconds, the unit automatically shifts to low speed, and the low speed indicator

lights. Press the power button again, the unit shuts off. The working state before shut

off will maintain to next operation. Timer mode without memory function.

SPEED: Continuously press the button, the wind speed shifts from low, medium, and

high, and indicator lights accordingly.

SWING: Press swing button to turn on or off the swing function and the indicator

lights on or off.

COOL: Press the cool button to achieve cool function and the indicator lights on or off.

TIMER:Press the timer button to set timing of 1-2-3-4-...7 hours, corresponding indica-

tor lights. Timing function is off when the timing indicator is off.

Table des Matières