Description - Ecolab Foamatic A1 150 Manuel D'entretien

1. Description

The Foamatic unit is used for automatic cleaning via stationary pipe connections in e.g. production areas, pro-
duction machinery or diffi cult-to-get-at places.
The unit is used for laying out of spray or foam detergents and desinfectants as well as pressure water for
rinsing. The time lag and the media of the activity in question are controlled by the built-in controller and the
internal valves. Combined with the externally placed area valves, a precise and uniform dosing is achieved.
In addition to automatic cleaning assignments, the Foamatic is available in a design with one or two pneumatic
blocks for manual cleaning. One block makes it possible for the user to work with one manual outlet when laying
out foam detergent and when rinsing with pressure water. The second block makes it possible to lay out spray
or foam desinfection.
A standard Foamatic unit is available with three different injector sizes, producing 150, 300 and 450 L foam per
minute respectively, using approx. 7 bar air pressure. However, this requires a suffi ciently large air volume, 200
- 450 l/min.
Furthermore the unit is delivered with one, two or three sections. Each section makes up one type of detergent
or desinfection for spray or foam lay out. All units are delivered with one valve for water/rinsing.
Table: Foamatic model program
For all versions you may choose one, two or no manual block. Plus UserPack.
Description
Foamatic A1 150
Foamatic A1 300
Foamatic A1 450
Foamatic A2 150
Foamatic A2 300
Foamatic A2 450
Foamatic A3 150
Foamatic A3 300
Foamatic A3 450
Function
One section with 150 liter injector
One section with 300 liter injector
One section with450 liter injector
Two sections with 150 liter injector
Two sections with 300 liter injector
Two sections with 450 liter injector
Three sections with 150 liter injector
Three sections with 300 liter injector
Three sections with 450 liter injector
EN
15