Circuit Diagram; Maintenance - Ecolab Foamatic A1 150 Manuel D'entretien

1.2

Circuit diagram

+ + + + + + + +
-AIN/DIN- -DIN/PIN-
| | | | | | | |
Eksternal start
Program 1
Program 2
Program 3
Program 4
Eksternal release
Program 1
Program 2
Program 3
Program 4
Water Y1
Air Y2
Flush Y3
Product 1 Y4
Product 2 Y5 / Area 12
Product 3 Y6 / Area 11

2. Maintenance

In general the Foamatic unit is maintenance free, as it consists of only a few moving parts and as the pump and
compressor is not placed inside the cabinet. However, to ensure optimum operation it is very important to main-
tain both pump and compressor.
Always make sure that no valves, pipes or hose connections are leaking. In order to achieve optimum suction
from the containers, please make sure that all clamps are correctly mounted and secured. Last but not least
check fi lters in the end of the suction hoses.
In order to keep a high level of hygiene the Foamatic cabinet should be cleaned with clean water both inside
and outside. If the unit is very fi lthy we recommend using a mild detergent. For further information, please con-
tact your Ecolab service department.
The outer side of the cabinet can be rinsed with clean water. In order to avoid damages to the controller and
other electric parts, we recommend using a cloth or a sponge to clean the inside of the cabinet. Cleaning with
running water inside the cabinet should only be done in the lower part of the cabinet.
18
DipSwitch
+ + + + + + + + + + + + + + + +
--------------- DOUT/DIN-----------------
| | | | | | | | | | | | | | | | | |
12345678
CFU
Ana
Out
RELEASE
Area 1
Area 2
Area 3
Area 4
Area 5
Area 6
Area 7
Area 8
Area 9
Area 10
PC
Fuse
Max 10 Amp
USB
17593