Quick Setup; Connections And Controls - Shure Motiv MV5 Guide De L'utilisateur

USB Microphone
The Shure MV5 microphone connects directly to a computer or mobile device over a USB or Lightning
podcasting, the MV5 features preset voice and instrument record modes for fast, easy configuration.
Features
• Convenient, Compact Design: This sleek and durable microphone mounts on the Shure MV5 desktop stand or any stand with a 1/4" threaded
adapter.
• Plug and Play: The MV5 automatically becomes the active audio device when plugged into a USB or Lightning compatible device.
• Preset Modes: Minimize setup time with modes designed for a variety of applications. You select the input mode and the gain, equalization, and
compression are ready and set to help you achieve high-quality sound.

Quick Setup

1. Connect the microphone to a computer or mobile device. Use the appropriate cable (USB or Lightning).
The Green status LED indicates a successful connection.
Note: When using apps like Voice Memo, the LED will not light until Record is engaged.
2. Confirm that the MV5 is the selected audio device.
Most computers and mobile devices automatically detect the MV5 and assign it as the primary audio device. If your computer settings default to
another device, open the sound control panel and select the MV5. To quickly verify that the device is recognized, plug headphones into the MV5
audio output and play an audio track. If you can hear sound, the microphone is functioning properly.
Note: When the MV5 is assigned as the audio device, all monitoring and playback from the recording software goes to the headphone output of the MV5.
3. Use the MODE button to select the preset mode that fits your application.
If the audio is too quiet or causes distortion, gain can be manually configured. However, the modes typically do not require additional gain adjust-
ments. Refer to the "Adjusting Microphone Level" topic in this guide for details.
4. In your recording application, select the MV5 as the input source.
See your software user guide for information on assigning input sources.
5. Record.
The microphone is ready to use!

Connections and Controls

① Mode Selection Button
Press to switch between preset modes
② Mute Button
Press to mute the microphone input
③ Headphone Volume Control
Adjusts the headphone volume
④ Headphone Output
Plug in any headphones with a 3.5 mm (1/8 inch) connector
⑤ Micro USB Port
Use the appropriate cable (USB or Lightning) to connect the MV5 to
a computer or mobile device
connection. Ideal for home recording or
®
⑥ Voice Mode
The LED indicator illuminates when this mode is selected
⑦ Status Indicator
LED Behavior
Green
Flashing Red (all 3 LEDs)
⑧ Instrument Mode
The LED indicator illuminates when this mode is selected
Note: Flat Mode is engaged when both mode LEDs are off.
Status
Active USB or Lightning
connection
Muted
3