Scope Of Application; Device Elements - Buhnen HB 230E Mode D'emploi

General
1 General
Please read this operating manual carefully and thoroughly before operating
the HB 230 E hot melt glue gun for the first time. Please pay special attention
to the safety information in chapter 2.
This operating manual must be available to every user.
All position numbers stated in this operating manual (e.g. "nozzle (1)") apply to
the figure on page 2.
1.1

Scope of application

The HB 230 E hot melt glue gun is intended for the use with commercially
available glue sticks (correct intended use).
Any other usage is unauthorized.
1.2 Specifications
Description
Included in delivery
Dimensions [mm]
Weight [g]
Operational voltage [V AC]
Power consumption [W]
Insulating Class
Safety class
Working temperature [°C]
Working material
Adhesive capability
1.3

Device elements

1
2
3
4
5
6
6a
Nozzle
Stand
Trigger
Power cable
On/off switch
Setting scre stroke limit
Locknut stroke limit
HB 230 E
Glue gun, spare nozzle, operating manual
290 x 230 x 70
625
220...240, 50 Hz
300
1
IP20
40 - 230, preset to 190° C
BÜHNEN hot melt adhesive in candle form,
Ø 12 mm
1 to 1.5 kg/hr (depending on temperature and
glue viscosity)
7 Insulation socket
8 „Up" button
9 „Down"button
10 Set button
11 Start-/Stop button
12 Digital display
10
GB