Invacare GLISSANDO Manuel De L'utilisateur page 6

GLISSANDO®/ Softform® PREMIER™/ Softform® EXCEL™/ ESSENTIAL®
INCLUDING BUT NOT LIMITED TO THE FAILURE TO
FOLLOW CLEANING INSTRUCTIONS, USE OF INAPPROPRIATE
CLEANING COMPOUNDS AND FAILURE TO ENSURE
THAT ANY PRODUCT IS THOROUGHLY DRIED BEFORE
TURNING OR FLIPPING IT OVER; DAMAGE RESULTING FROM
CONTAMINATION FOLLOWING DAMAGE TO THE COVER
AND FAILURE TO REPLACE IT, CONTAMINATION DUE
TO INCORRECT STORAGE OR FAILURE TO INSPECT THE
INTERIOR OF THE MATTRESS AS STATED HEREIN, OR DAMAGE
DUE TO UNUSUAL CONTAMINATION OR INFECTION,
SPILLAGE OR STAINING, OR USE OF ABRASIVE, CORROSIVE
OR ANY SUCH SIMILAR DAMAGING SUBSTANCE; DAMAGE
DUE TO UNDERTAKING ANY ACTION OR PROCEDURE
USING THE PRODUCT OUTSIDE ITS NORMAL AND INTENDED
USE; DAMAGE RESULTING FROM FAILURE TO REPLACE
DAMAGED PARTS PROMPTLY OR DAMAGE DUE TO INTERIOR
PARTS BEING USED WITHOUT THE COVER, BEING USED
WITH A DAMAGED COVER, OR WITH THE COVER BEING
INCORRECTLY FITTED; DAMAGE WHEN ANY PARTS OF THE
MATTRESS ARE USED AS PART OF, OR IN CONJUNCTION
WITH, ANY OTHER PRODUCT OR PIECE OF EQUIPMENT
EXCEPT AS SPECIFICALLY PROVIDED FOR BY INVACARE;
DAMAGE NOT PROVEN TO THE SATISFACTION OF INVACARE
TO BE DUE TO DEFECTIVE MATERIALS, WORKMANSHIP OR
ASSEMBLY; OR PRODUCTS MODIFIED WITHOUT INVACARE'S
EXPRESS WRITTEN CONSENT INCLUDING, BUT NOT LIMITED
TO MODIFICATION THROUGH THE USE OF UNAUTHORIZED
PARTS OR ATTACHMENTS OR PRODUCTS DAMAGED BY
REASON OF REPAIRS MADE TO ANY COMPONENT WITHOUT
THE SPECIFIC CONSENT OF INVACARE.
IT IS A CONDITION OF THIS WARRANTY THAT THE
FOLLOWING IS COMPLIED WITH:
6
1. ALL INSTRUCTIONS FOR CLEANING AND MAINTENANCE
OF THE MATTRESS ARE ADHERED TO.
2. THE INTERNAL AND EXTERNAL PARTS OF ANY
PRODUCT ARE INSPECTED AT LEAST ONCE EVERY
THREE (3) MONTHS FOR ANY DAMAGE AND WEAR. ALL
DAMAGED PARTS ARE REPLACED IMMEDIATELY WITH THE
APPROPRIATE REPLACEMENT PART, OR THE MATTRESS
IS IMMEDIATELY TAKEN OUT OF SERVICE UNTIL THE
REPLACEMENT PART HAS BEEN OBTAINED AND THE
DAMAGED PART HAS BEEN REPLACED.
3. THE MEASUREMENT OF COMPRESSION OF THE MATTRESS
(THE "COMPRESSION TEST") BEYOND 25% WILL BE
DETERMINED BY LAYING A STRAIGHT EDGE OVER THE
COMPRESSED AREA AND MEASURING THE DEPTH OF THE
AREA. IF THE FOAM IS DETERMINED TO BE COMPRESSED
BEYOND 25%, THE MATTRESS WILL BE REPLACED.
THE FOREGOING EXPRESS WARRANTY IS EXCLUSIVE AND IN
LIEU OF ANY OTHER EXPRESS WARRANTIES WHATSOEVER,
WHETHER EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE AND THE SOLE REMEDY FOR
VIOLATIONS OF ANY WARRANTY WHATSOEVER, SHALL
BE LIMITED TO REPAIR, REPLACEMENT, OR REFUND OF
THE DEFECTIVE PRODUCT PURSUANT TO THE TERMS
CONTAINED HEREIN. THE APPLICATION OF ANY IMPLIED
WARRANTY WHATSOEVER SHALL NOT EXTEND BEYOND
THE DURATION OF THE EXPRESS WARRANTY PROVIDED
HEREIN. INVACARE SHALL NOT BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER
AND DISCLAIMS ANY LIABILITY BEYOND THE INITIAL
PURCHASE PRICE OF THE MATTRESS. THIS WARRANTY SHALL
BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL LAWS
AND REQUIREMENTS.
1185740-A