Bluetooth® Connection - Pro-User IBT1 Mode D'emploi

Connecting your IBT1 Intelligent Battery Tester to your Bluetooth® enabled smartphone
Note:
iOS 8.0 or later, or Android 4.4 or later and a mobile device with Bluetooth® BLE Ver. 4.3 or later is needed
to connect to the charger
1. Download and install the free "Pro-User Check & Charge" App from Apple App Store or Google
Play Store.
2. Make sure Bluetooth® is enabled on your smartphone.
3. Connect the IBT1 to the battery
4. Open "Pro-User Check & Charge" App.
5. Check the App´s "Settings"- and take the desired settings you need (Background Refresh and
Notifications)
6. Select the IBT1 in the device-list you want to connect to. Make sure the section "Tester" is
selected. You may want to connect to more than one tester or a compatible battery charger.
7. Change the settings as required
Congratulations !
Now you can check your battery status in a very convenient way.
The app is easy to use and gives you all the information you need to know about your battery.
Name & Password:
If you have more than one IBT1 tester or a charger, you may want to rename the devices. The password
is automatically stored in the app. The password of a Pro-User IBT Battery Tester is not changeable. It
consists of the unique product key printed on the device.
Bluetooth® Connection:
If you put your smartphone to sleep or the Bluetooth® connection was interrupted in another way, it is
possibly required to wait for some seconds and to connect to the charger again (Pull to refresh the device
list). Usually no password is required as the password is stored in the app.
8
BLUETOOTH® CONNECTION