Important Safety Instructions - Pro-User IBT1 Mode D'emploi

Testeur de batterie digital avec bluetooth
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The IBT1 Intelligent Battery Tester with Bluetooth® is an advanced battery tester manufactured for
Pro-User Europe GmbH that will help you to monitor your battery's performance data. The IBT1
Intelligent Battery Tester with Bluetooth® functionality and the free app "Check & Charge" additionally
enables you to check your battery with your connected Bluetooth®-enabled device. (iOS 8.0 or later, or
Android 4.4 or later and a mobile device with Bluetooth® BLE Ver. 4.3 or later is needed to connect to
the charger).
We have taken numerous measures in quality control to ensure that your product arrives in top condition,
and will perform to your satisfaction.
Please carefully read and follow the safety and operating instructions. Not following these instructions
may result in a serious accident, including damaged property, serious or even fatal injuries. If the device
is passed on to another person, this manual must also be handed over with it.
CAUTION: Please read this instruction manual carefully before installing and starting up
the device. Do not operate the device unless you have fully read and understood all the
provided information. If you are not confident working with 6V/12V/24V DC voltages or
are unsure of what you are doing, consider to seek for professional help e.g. a car garage
or your vehicle´s manufacturer. Failure to observe these instructions may cause an
electrical shock, fatal or serious injury, material damage or impair the function of the
device.
Read your vehicle's owner's manual!
Some vehicle manufacturers may have special requirements before doing any changes to the vehicle´s
battery. (e.g. fuses that have to be removed or certain security demands).
Pro-User accepts no liability for direct or indirect damage caused by faulty connections, a usage of
damaged or altered products, a usage for purposes other than described and especially caused by failure
to follow these instructions.
For indoor use only: Do not use the unit close to open fire. Do not operate the unit in
explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Please stop using the device, if the unit is getting very hot, is smoking or is showing any
abnormal behaviour.
Pro-User Europe GmbH is not liable for any direct or indirect damages or injuries caused by the use of
the device, especially caused by failure to follow these instructions.
Type of Batteries
This device is intended to be used only on 6V & 12V & 24V batteries, e.g. Lithium, WET, Gel-, AGM-,
Calcium-, VRLA-Batteries. Follow the recommendations of your battery´s manufacturer.
Storage
When not in use, store the battery tester in a dry environment. Store the battery tester in a safe place
out of the reach of children.
Maintenance
The unit is maintenance-free. If necessary, clean the unit with care using a dry cloth. Don't try to open
the body casing. There are no user-serviceable parts inside. Damage due to improper use, modifications
or attempted repairs lead to the exclusion of liability and the loss of warranty. Do not lengthen or shorten
the cables. The cables of this device cannot be replaced. If they are damaged, the appliance must be
discarded.
INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

18170

Table des Matières