Automatic Memory Of Station Presets; Tuning To Preset Stations; Frequency Search Function; Cd/Mp3/Wma - Alpine CDE-9852 Mode D'emploi

• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.

Automatic Memory of Station Presets

1
Press BAND repeatedly until the desired radio band
is displayed.
2
Press and hold A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into buttons 1 to 6 in
order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1
Press BAND repeatedly until the desired band is
displayed.
2
Press any one of the station preset buttons (1
through 6) that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.

Frequency Search Function

You can search for a radio station by its frequency.
1
Press and hold for at least 2 seconds in Radio
mode to activate Frequency Search mode.
2
Turn the Rotary encoder to select the desired
frequency.
3
Press MODE to receive the selected frequency.
• The search mode in Frequency Search mode is canceled by pressing
and holding for at least 2 seconds. Or, the search mode will be
canceled when an operation has not been performed in 10 seconds.
8
-EN

CD/MP3/WMA

(OPEN)
SOURCE/POWER
Rotary
encoder
MODE

Playback

1
Press (OPEN).
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Close the front panel manually.
When a disc is already inserted, press SOURCE/POWER to
switch to the CD mode.
The mode will change every time the button is pressed.
TUNER DISC IPOD*
* Only when the iPod is connected.
3
While playing back MP3/WMA, press
select the desired folder.
Pressing and holding
continuously.
4
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
5
To pause playback, press
Pressing / again will resume playback.
/
A.ME
4 5 TITLE
TUNER
or to
or will change folders
/ .