Product Warranty - Hamilton Beach Commercial HMI 200 Manuel D'utilisation

Troubleshooting Guide
Problem . . .
Immersion mixer will
not turn on
Excessive noise
or vibration
Motor strains or stops
Poor results
(See also Tips)
Accessories
Part Number
HMIA 200B
This product is warranted to be free from defects in material and workmanship for a period of two (2) years from the date
of original purchase, except as noted below. During this period, we will repair or replace this product, at our option, at no
cost to you. THE FOREGOING WARRANTY IS IN LIEU OF ANY OTHER WARRANTY OR CONDITION, WHETHER
EXPRESS OR IMPLIED, WRITTEN OR ORAL INCLUDING WITHOUT LIMITATION ANY STATUTORY WARRANTY OR
CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ANY LIABILITY IS EXPRESSLY
LIMITED TO AN AMOUNT EQUAL TO THE PURCHASE PRICE PAID, AND ALL CLAIMS FOR SPECIAL, INCIDENTAL
AND CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED. There is no warranty with respect to parts subject to
wear, including without limitation: motor brushes, container and cutter assembly, clutches, bristle brushes, funnel, stainless
steel cup, agitators, carafes, etc. This warranty extends only to the original purchaser and does not cover any condition
resulting from abuse, misuse, neglect, unauthorized repair, or use not in conformity with the printed directions. Always use
this product in accordance with the printed directions. This warranty gives you specific legal rights and you may also have
other legal rights which vary from state to state, or province to province. Some states do not allow limitations on implied
warranties or special, incidental or consequential damages, so the foregoing limitations may not apply to you.
If you have a claim under this warranty please contact our TECHNICAL SERVICE DEPARTMENT at 1-866-285-1087
or 910-693-4277. (For faster service please have model, series, and type numbers ready for operator to assist you.)
Reasonable proof of date of purchase must be presented; otherwise the effective date of the warranty will be based
upon the date of manufacture plus ninety (90) days.
Hamilton Beach/Proctor-Silex, Inc.
Commercial Technical Service
261 Yadkin Road
Southern Pines, NC 28387
8
Solution . . .
• Make sure the mixer is plugged in.
• Check for a blown fuse.
• Make sure that the blade assembly is properly installed.
• Make sure that the blade does not contact the sides or bottom of the container.
• Reduce the amount of product in the bowl. Mix thick products in smaller batches.
• Make sure ingredients are prepared properly for mixing.
• Reduce the amount of product.
• Process for a longer or shorter period of time.
• Adjust the mixing speed.
Description
Detachable blade/shaft assembly

Product Warranty

This Warranty supercedes all other Product Warranties
LIMITED WARRANTY
09/05