Connecting The Receiver To A Balanced Input; Connecting The Receiver To A Speaker; Connecting The Dsr 70 Dual Receiver To A Balanced Input - Harman AKG DMS 70 Quattro Mode D'emploi

Installation and Connection
Connecting the audio outputs of the DSR 70
Quattro receiver
Connecting the DSR 70 Dual receiver to a
balanced input
32

Connecting the receiver to a balanced input

Use an XLR cable to connect the BALANCED output (10) of the required channel on the back
of the receiver to the balanced microphone input (XLR socket) on the mixer or amplifier.

Connecting the receiver to a speaker

Use an XLR cable to connect the sum output (9) of all four channels on the back of the
receiver to an active speaker.
Connect the 6.35 mm jack (10a) of the required channel on the back of the receiver to the
balanced microphone input on the mixer or amplifier.
DMS 70 Quattro/Dual DMS 70 DMS 70 DMS 70