Rear Panel - Ltc Audio LTC-500 Manuel D'utilisation

GB - FRONT PANEL
1. POWER SWITCH
On-off switch.
2. POWER LED
Led indicabing when the amplifier is switched on.
3. INPUT ATTENUATORS
Input gain attenuator potentiometers. Attenuate the level of the external signal sent to the respective
channels
of the amplifier. Continuously variable values, expressed in dB, are between:
Fully closed (the signal is completely attenuated and therefore not sent to the channel of the amplifier)
and fully
open, i.e. nominal level (the signal is not attenuated in any way, so is fed to the amplifier channel at
the same
level at which it arrives on input).
4. SIGNAL LED
LED indicating when the amplifier playing the music.
5. PEAK LED
LED indicating when the signal is clip.
6. EQ
Allow you to controls Hi-range, Mid-range and Low-rang of signals.
7. INPUT SELECT
Allow you to select the CD the TV the PC and the Mp3 inputs.
8. MP3 INPUT
3.5mm JACK input socket for connection of high level sound sources.

REAR PANEL

1. LINE IN
JACK connectors.
These connectors are connected in parallel with the respective RCA connectors.
This enables a second unit (e.g. another amplifier) to be daisy-chained to the first. It is thus possible to
power
several amplifiers using the same signal, forming more powerful sound reinforcement systems.
2. SPEAKER OUT
BINDING POST connectors (minimum impedance 4 Ω).
3