Clock And Timer; Using The Clock; Using Timer And Sleep Timer - Yamaha MCR-550 Mode D'emploi

Using the clock

To set the clock, press and hold CLOCK or press
OPTION to enter CLOCK SET of the option menu.
As for the setting, refer to "Using option menu" on
page 16.
Once you set the clock, you can display the clock on the
front panel display.
Press CLOCK.
When you press CLOCK while the power is on, the clock
is displayed on the front panel display for a few seconds.
When you press CLOCK during standby mode, you can
select whether to display the clock on the front panel
display or not.
Notes
• This unit supports 24-hour clock display.
• The clock setting will be lost if you disconnect the power cable
from the wall outlet for several minutes.

Using timer and sleep timer

■ Using the timer
The timer sets the unit to play back music at the time you
set.
To set the timer, press and hold TIMER or press OPTION
to enter TIMER SET of the option menu.
As for the setting, refer to "Using option menu" on
page 16.
To use the timer, set the appropriate input source securely
and set the timer in the option menu in advance (☞ P. 17).
Press repeatedly.
TIMER OFF: To set the timer off.
TIMER ONCE: To set the timer once.
TIMER EVERY: To set the timer everyday at the same
time.
When you switch the timer set to TIMER EVERY or
TIMER ONCE, the TIMER indicator lights up on the
front panel display.

CLOCK AND TIMER

Notes
• The clock has to be set in advance.
• When the timer is set, the TIMER indicator lights up on the
front panel display. While the power is on, the TIMER indicator
flashes as the set time of the timer becomes closer.
y
• The settings set in timer settings are retained.
■ Using sleep timer
The sleep timer sets the unit to the standby mode after the
specified time elapses.
The SLEEP indicator lights up on the front panel display.
Press repeatedly.
15
En