Dry Pick Up - IPC LP116 Traduction Des Instructions Originales

ENGLISH
COMPONENT DESCRIPTION (PAGE 51)
A - Motor head
B - Switch
C - Cable holder
D - Exhaust air grid
E - Hooks
F - Tank
G - "T" slot
H - Inlet
I - Castor wheels
J - Exhaust air filter
K - Main filter to insert into the tank (filtering cartridge as alternative)
L - Filter bag to apply on top of deflector. This filter does not exclude the use of polye-
ster filter, that still has to be used.
M - Wand
N - Flexible hose
O - Hose
P - Double use brush
Q - Crevice nozzle
R - Upholstery nozzle
S - Round brush
T - Speed regulator (optional)
U - Electric floorhead additional socket (optional)
V - Warning light (optional)
W - Detachable power cord (optional)
Z - Tool holder (optional)

DRY PICK UP

Insert filter bag -L- on top of the deflector (fig.1). Check that the appliance is equipped
with main filter -K- and exhaust air filter -J- and that they are correctly assembled. Insert
the hose connector into the inlet -H- (fig. 2). Insert the other side of the flexible hose into
the wand -M- and twist it to tighten the connection.
Attach the wand to the hoses -O- and the double use brush -P- (or the desired tool).
Turn the vacuum cleaner on through the switch -B-.
MAINTENANCE
Replacing/assembling main filter (page 54)
Replacing filtering cartridge (optional - page 55)
Replacing exhaust air filter (page 54)
13