Nfc Mode - Renkforce TT318 2.1 Notice D'emploi

A new Bluetooth
The range is max. 8 m in open areas.
If necessary, enter the password "0000".
If a connection already exists, press the PAIR button to activate the pairing mode. The existing connection
will be interrupted.
If no connection is established with another device within 2 minutes, the previously interrupted connection
will be restored.
The connection is interrupted if the range is exceeded.
If you want to connect your device again, place it within the detection range.
If no connection can be made, follow the previous instructions.
Your device must support the standard A2DP (Advanced Audio Distribution Profile).
If your device supports the AVRCP profile (Audio Video Remote Control Profile), you can control playback
using the remote control (11, 12).
g) NFC mode
NFC is the abbreviation for Near Field Communication. Note, that NFC only works with this product when your mobile
device is equipped with NFC.
• Select "BT" on the product as the audio source.
• Activate NFC on your mobile device.
• Position your mobile device to the NFC sensor area (4). Your mobile device will vibrate or show a message in the
display.
• Start audio playback on your mobile device.
• Remove your mobile device from the NFC sensor area.
When transmitting data via NFC, you may need to remove the protective cover from your mobile device in
order to ensure proper connection.
28
device must first be connected to the product.
®