Symbols On The Shredder; General Notes On Safety - Grizzly GHS 2842 B Notice D'utilisation Originale

Symbols on the shredder

Warning!
Read the manual.
Wear ear and eye protection.
Wear hand protection.
Do not expose the unit to rain.
Caution! Switch off the motor and
disconnect from the mains before
adjustment or cleaning work, or if
the flex is caught or has been dam-
aged.
Warning! Danger of injury from ro-
tating blade cylinder.
Keep your hands and feet away
from the funnel feeder while the
shredder is in operation.
Caution!
Trailing blade
Warning! Danger from spin-off.
Keep your distance from the feeder
and ejection area, and keep others
away from the danger area.
Always unplug the shredder before
working on it.
Do not use as a stepping
L Guaranteed noise power level
WA
dB
Safety class II
Do not dispose of electrical equip-
ment in the domestic waste.

General notes on safety

• This appliance is not intended for use by
persons with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, unless they have been giv-
en supervision or instruction concerning use
of the appliance by a person responsible for
their safety.
Children should be supervised to ensure
•
that they do not play with the appliance.
• Never allow children or other persons un-
familiar with the user manual to use the
shredder. Local regulations or bylaws may
determine the minimum age for using the
shredder.
Observe noise control and local regulati-
ons.
Caution! When using power tools,
observe the following basic safety
measures for the prevention of electric
shocks and the risk of injury and fire:
Preparation:
• Never use the shredder with other persons
or animals nearby.
• Wear hearing and eye protection at all times
when using the shredder.
• Wear appropriate protective clothing such
as protective gloves, firm footwear and long
trousers. Do not wear loosely fitting clothes
or clothes with dangling cords or belts.
• Only use the shredder in the open (that is,
away from walls or other rigid structures) on
a firm, level surface.
• Do not use the machine on a paved, grav-
elled area, which could be damaged by
ejected material.
• Before you start up the shredder, check that
all of the nuts, bolts and other fastenings are
tight. Covers and shields must be fastened
properly and in good working order. Replace
any damaged or illegible stickers.
GB
75