BOMBAS IDEAL CPH Série Notice D'utilisation Et D'entretien page 24

Bombas Ideal, S.A.
After checking the alignment and before proceeding to start up the
set fit the protections of the moving parts to guarantee the safety requisites.
DO NOT START UP WITHOUT THE PROTECTION GUARDS BEING PROPERLY
FITTED
8.4.- Electrical connections.
Qualified staff should make electrical connections.
Before making the motor connections, check that the electrical parts on which you are going to
work are not connected to the power supply.
he ground cables (yellow/green) should be connected to the ground circuit of the system before
connecting up the other conductors.
The figures show the proper connection for the case of direct starting and three-phase line with
230 volts and 400 volts mains voltage.
Y/∆ STARTING. Remove the bridge plates from the terminal box and connect the motor terminals to the
corresponding ones on the starter.
22