Configuration - Minebea Intec YDO02C-232 Notice D'installation

Configuration: Signum
Operating menu overview for the "UniCOM" interface
(see also the operating menu overview in the "Configuration" section of the Signum operating manual)
Appl.
Fn key
Setup WP1
COM1
UniCOM
YDO02C
28
OFF *
WP2 RS-232
RS-485
DATAPROT SBI *
XBPI-232
XBPI-485
SMA
PROFIBUS
ETHERNET
SBI standard version
SBI verified version (for legal metrology)
XBPI-232 *
ADC-232
IS-485 *
ADC-485
Address
Appl. no
Dat. yes
Source IP: 192.168.0.1 *
Source name
Listen port: 49155 *
Subnet mask: 255.255.255.0 *
Gate IP: 0.0.0.0 *
DNS IP: 0.0.0.0 *
Destination IP: 0.0.0.0 *
Destination port: 49155 *
Protocol: TCP *
UDP
Mode SBI-SRV*
(server)
SBI-C/S
(client)
xBPI
SMA
ModBus/TCP
Addr. 0
...
Addr. 126 *
Add 34 byte application data
6.1. Data output (manual/automatic)
6.1.1 Manual, without stability
6.1.2 * Manual, at stability
6.1.7 Protocol printout for PC
7.2. Data output: Line format
7.2.1 For raw data: 16 characters
7.2.2 * For other applications:
22 characters
6.1. Data output manual/automatic
6.1.1 Manual, without stability
6.1.2 * Manual, at stability
6.1.4 Automatic, without stability
6.1.5 Automatic, with stability
6.1.7 Protocol printout for PC
6.3. Time-dependent automatic output
6.3.1 * 1 display update
6.3.2 2 display updates
6.3.4 10 display updates
6.3.7 100 display updates
7.2. Data output: Line format
7.2.1 For raw data: 16 characters
7.2.2 * For other applications:
22 characters
7.3. Data output: Line format
7.3.1 Without "+" sign
7.3.2 With "+" sign