Minebea Intec YDO02C-232 Notice D'installation page 22

setup / com-wp
YDO02C
22
dat.prot Data protocols
ether Ethernet
mode
SBI-C/S (client)
Data output (manual/automatic)
Time-dependent automatic data output
Data output: Line format
Data output: Sign format
xBPI
SMA
ModBus/TCP
Dev.Net.
MAC ID
BAUD
QUICK.CO.
APPL.DAT
printer Printer configuration
YDP20
YDP14IS
uni-pri
YDP04IS*
analog Analog data output port for PLC operation
CONFIG.
Analog output: value
Analog output: error indicator
Analog output mode OUT P. MOD
Analog Out: Data Output Min./Max.
Analog output: value adjustment trim
Optional: Multi-scale connection (Combics 2 only)
off.*
WP-2 Weighing platform 2
s. unicom / wp-2
Manual, without stability
Manual, at stability*
Automatic, without stability
Automatic, with stability
Protocol printout for
computer (PC)
1 display update
2 display updates
10 display updates
100 display updates
For raw data: 16 characters
For other applications: 22 characters
Plus sign disabled
Plus sign enabled
1 bis 62 selectable
125k, 250k und 500k bp
125k *
250K
500k
no *
Quick Connect activate functionality
yes
no *
Transmit application data
yes
YDP20 (also applies to YDP03-OCE)
Menus 5.1 to 5.4 similar to COM1
YDP14IS (also applies to YDP02IS..., YDP12IS...)
Strip printer*
line
Label printer
label
Universal printer
Menus 5.1 to 5.6 similar to COM1
YDP04IS
Strip printer*
line
Label printer
label
Label printer with manual feed
labff
Net value*
net
Gross value
gross
high.20ma High level (20 mA)*
low.0/4ma Low level (0/4 mA) When menu is open or
during calibration, 0/4 mA on this interface
Zero to maximum capacity*
0-max.l.
Minimum/maximum values
min./max
Min. (0/4 mA) input in kg
min.inp
Max. (20 mA) input in kg
max.inp
4 mA measured value entry
4 MA
20 mA measured value entry
20 MA
6.1
6.1.1
6.1.2
6.1.4
6.1.5
6.1.7
6.3
6.3.1*
6.3.2
6.3.4
6.3.7
7.2
7.2.1
7.2.2*
7.3
7.3.1
7.3.2*
8.
8.12
8.12.1
8.12.2
8.13
8.13.1
8.13.2
8.14
8.14.1
8.14.2
8.15
8.15.1
8.15.2
8.16
8.16.1
8.16.2