Care And Cleaning; Painted Or Enameled Surfaces; Rack; Stainless Steel - Monogram ZJ7000 Manuel De L'utilisateur

Painted or
Enameled
Surfaces

Rack

Stainless
Steel
Control
Knob
49-80384-6
Be sure the controls are in the OFF position and all surfaces are cool before cleaning any
part of the warming drawer.
Use soap and warm water to thoroughly clean .
Clean the rack with detergent and water . After
cleaning, rinse the rack with clean water and
dry with a clean cloth .
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or
polish . Always wipe the surface in the direction
of the grain . Follow cleaner instructions for
cleaning the stainless steel surface .
The control knob may be removed for easier
cleaning .
Before removing the knob for cleaning, please
note that it is in the PROOF position .
Wash the knob in soap and water or a vinegar
and hot water solution but do not soak .
Dry and replace the knob .

Care and Cleaning

Electric Warming Drawer
To inquire about purchasing stainless steel
appliances cleaner or polish, or to find the
location of a dealer nearest you, please call
our toll-free number:
National Parts Center
888.880.3030 (Canada)
Monogram.com (U.S.)
Monogram.ca (Canada)
800.444.1845 (U.S.)
11