Troubleshooting; Technical Data - gourmetmaxx CM-111A Mode D'emploi

Troubleshooting

If the device is not working properly, please check whether you are able to
rectify the problem yourself fi rst.
Do not attempt to repair a defective device yourself!
Problem
The device is not
working.
The thermo cup is
overfl owing.
The device is not
brewing coffee
or the brewing
process is very
slow.

Technical data

Model:
Product:
Voltage supply:
Output:
Safety class:
Suitable for use with food.
Warning! Hot surfaces.
21
Potential cause/solution
• Is the mains plug properly connected with the socket?
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Is the device activated? Push the Power switch.
• Has the permanent fi lter and the permanent fi lter hol-
der been correctly inserted?
• Is there suffi cient water in the water tank?
• Are there coffee grounds/is there a coffee pad in the
permanent fi lter?
• The water tank is overfi lled. Always fi ll the water tank
with an amount of water that the cup (thermo cup etc.)
located under the coffee spout is capable of holding!
• There is no water in the water tank.
• No coffee has been added to the permanent fi lter.
• The device must be decalcifi ed (see chapter "Care
and decalcifi cation").
CM-111A
Z 06448
220 – 240 V~ 50/60 Hz
650-750 W
I
Customer service/
importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
*) Calls subject to a charge.
EN