Split Pair (Error Code 8) - Metz Connect KAPRi plus Instructions De Service

6. Operation

6.13 Split pair (Error Code 8)

"Split pair" stands for the coincindent exchange of two wires from
different wire pairs when terminating the cable from both ends
(see example below). It is absolutely necessary to eliminate this
error for high frequency transmission ways.
If the KAPRi plus detects this error the wire LEDs (F) will display
the exchanged wires.
Example for the split pair error (exchange of two wires from two
pairs): In this case the red LEDs no. 3, 4, 5 and 6 will light.
The error code for split pair is digit 8.
E16