Wrong Wiring (Error Code 5) - Metz Connect KAPRi plus Instructions De Service

6. Operation

6.10 Wrong Wiring (Error Code 5)

If the KAPRi plus detects wrong termintated conductors in an
installation or cable the conductor LED (F) for the respective con-
ductors always light in pairs. The conductor LED for the terminal
pole at the near end of the installation line lights continuously, the
conductor LED for the terminal pole at the far end is flashing.
KAPRi plus
Mainframe
In our example two errors are detected:
1. Wrong wiring (error code 5), conductor LED 5 lights
continuously and conductor LED 6 flashes.
2. Wrong wiring (error code 5), conductor LED 6 lights
continuously and conductor LED 5 flashes.
The error code for wrong wiring is digit 5.
Note
The near end of an installation line is the terminated side that the
KAPRi plus Mainframe is connected to.
The far end of an installation line is the terminated side the KAPRi
plus Test Box is connected to.
E14
KAPRi plus
Test Box