Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
20. DIRECTION OF FEED. Feed work into a blade
or cutter against the direction of rotation of the
blade or cutter only.
21. NEVER LEAVE TOOL RUNNING UNATTENDED.
TURN POWER OFF. Do not leave tool until it
comes to a complete stop.
22. REPLACEMENT PARTS. When servicing, use
only identical replacement parts.
VOLTAGE WARNING: Before connecting the tool to a
power source (receptacle, outlet, etc.) be sure the
voltage supplied is the same as that specified on the
nameplate of the tool. A power source with voltage
greater than that specified for the tool can result in
SERIOUS INJURY to the user- as well as damage to
the appliance. If in doubt, DO NOT PLUG IN THE
APPLIANCE. Using a power source with voltage less
Ampere Rating
More Than
0
6
10
12
000173
GROUNDING INSTRUCTIONS:
In the event of a malfunction or breakdown,
grounding provides a path of least resistance for
electric current to reduce the risk of electric shock.
This tool is equipped with an electric cord having an
equipment-grounding conductor and a grounding
plug.
The plug must be plugged into a matching outlet that
is properly installed and grounded in accordance
with all local codes and ordinances.
Do not modify the plug provided - if it will not fit the
outlet, have the proper outlet installed by a qualified
electrician.
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. The
conductor with insulation having an outer surface
that is green with or without yellow stripes is the
equipment-grounding
replacement of the electric cord or plug is necessary,
do not connect the equipment-grounding conductor
to a live terminal.
Check with a qualified electrician or service
personnel if the grounding instructions are not
completely understood, or if in doubt as to whether
the tool is properly grounded.
Table 1: Minimum gage for cord
Not More Than
6
10
12
16
conductor.
If
repair
than the nameplate rating is harmful to the motor.
USE
PROPER
three-wire extension cords that have three-prong
grounding-type plugs and three-pole receptacles
that accept the tool's plug. Make sure your extension
cord is in good condition. Replace or repair
damaged or worn cord immediately. When using an
extension cord, be sure to use one heavy enough to
carry the current your product will draw. An
undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. Table 1
shows the correct size to use depending on cord
length and nameplate ampere rating. If in doubt, use
the next heavier gage. The smaller the gage number,
the heavier the cord.
Volts
Total length of cord in feet
120 V
25 ft.
18
18
16
14
Repair
or
immediately.
Your unit is for use on 120 volts and has a plug that
looks like Fig. "A".
Fig. A
Grounding
Blade
000088
or
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to sharpener safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
3
EXTENSION
CORD.
50 ft.
100 ft.
AWG
16
16
16
14
16
14
12
Not Recommended
replace
damaged
Cover of Grounded
Outlet Box
Use
only
150 ft.
14
12
12
or
worn
cord
USB089-1
Publicité
Table des Matières
