De Dietrich TEPPAN YAKI Mode D'emploi Et De Montage page 40

Notch dimensions
Dimensions of the appliance:
Sizes of the hole to be cut on the surface of the top
This Teppanyaki was created to be installed in a work top or in a kitchen unit simply
by cutting a hole following the corresponding shape shown in "Notch dimensions"
Pay attention to the height of the top following the size of the Teppanyaki.
Any support can be suitable: masonry, wood, metal, granite, laminate, etc. respecting
the following measurements as high temperatures can modify or damage the mate-
rials (1.1.5).
- If the covering is made of flammable material (e.g. wood), the minimum distance
(5) between the worktop and the covering MUST be 50 mm.
- If the covering is made of non-flammable material (e.g. metal, natural stone,
ceramic tiles) the minimum distance (5) between the worktop and
the covering must be 50 mm less than the thickness of the covering.
Example: covering thickness 15 mm
50 mm - 15 mm = minimum distance 35.
(1.1.1A)
(1) Wall
(2) Niche cover
size x = covering thickness
(3) Work top
(4) Notch in the work top
(5) Minimum distance
for flammable materials 50 mm
for non-flammable materials 50
mm - size x
13
EN
515 x 380 mm
490 x 340 mm