Publicité
Les langues disponibles
Les langues disponibles
3. Loading
bikes
on the bike
A.
Load bikes in alternating directions on the plastic cradles so as to have the lowest possible centre
of gravity.
B.
Secure the bikes to the bike rack with the rubber straps " Y ". Make sure that the bikes are not
touching your vehicle's bodywork. To prevent the bikes from rubbing against the bike rack, insert
the split foam cushions.
C.
After loading bikes on the bike rack, retighten all the straps (5, 6, 7) and tie the excess lengths into
tight knots at the bottoms of the loops to prevent them from
flapping in the wind.
D.
Use the extra strap (8) to secure bike tyres/frames to the bike
rack and prevent the bikes from swaying while on the road.
WARNING: THE DRIVER OF THE VEHICLE IS RESPONSIBLE FOR PROPERLY
TRANSPORTED. FREQUENTLY CHECK
rack
TH
EBIKES AND BIKERACK
17
SECURING THE
WHILE ON THE
ROAD.
LOAD
BEING
Publicité
