Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
- Place the fryer on a plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible materials
even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Place the product to enable easy access to the plug
- Then place all the accessories.
- Keep the lid near the fryer to enable you covering it after use or in case of fire.
b) First starting:
Before the first use, rinse the container and basket in hot water with washing liquid and
dry them with a clean and soft cloth.
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
- Make sure that every control knob is positioned on 0.
- Check that neither the cord nor the plug are damaged
- Unwind completely the electric power cable and connect it in a plug connected with
the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly on
the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Elements of command and display
Thermostat (n°4 on picture)
Safety thermostat (under the box)
Microswitch
Orange pilot light (n°3 on picture)
Green pilot light (n°2 on picture)
Timer (n°1 on picture)
Function
Set the temperature
Automatic stop in case of overheating or
lack of oil
Automatic stop in case of improper posi-
tioning of the control unit
Oil is warming (pilot light on)
Oil is hot (pilot light off)
Machine on (pilot light on)
Machine off (pilot light off)
Cooking time
19
Publicité
Table des Matières
