Abicor Binzel ABICUT 25K Mode D'emploi page 18

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com.
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Special warnings for operation
2.4 Emergency information
3 Product description
3.1 Technical data
3.2 Signs and symbols used
3.3 Nameplate
4 Scope of delivery
5 Functional description
6 Putting into operation
6.1 Setting up the torch body
6.2 Connecting the plasma cutting
torch
6.2.1 Compressed air as plasma and
cooling gas
6.2.2 Filtered compressed air free of
oil and water
EN - 2
7
EN-3
EN-3 7.1
7.2
EN-3 7.2.1 Trigger guard
EN-3 7.2.2 Safety device
EN-3 7.3
EN-4
EN-4 7.4
EN-4 8
EN-5
EN-7 9
EN-7
10
EN-7
11
EN-8
EN-8
EN-9
EN-9
EN-10
EN-10
ABICUT 25K/45/75
Operation
Before switching on
Trigger guard and safety device EN-11
Trigger with dual-cycle function (for
manual torches only)
Igniting the torch
Putting out of operation
Maintenance and cleaning EN-13
Troubleshooting
Disposal
BAL.0173 • 2018-09-28
EN-10
EN-11
EN-11
EN-11
EN-11
EN-12
EN-12
EN-14
EN-15