Breguet TRADITION 7037 Mode D'emploi page 5

7037
"T "
RADITION WATCH
- ,
SELF WINDING WATER
The crown has two positions:
1. Neutral position
(manual winding)
2. Time-setting position
, -
OFF CENTRED HOUR CHAPTER RING
- 30
RESISTANT TO
Starting the watch
Crown in position 1. This position
enables manual winding of the
self-winding movement, meaning
winding by rotating the crown
upwards ( ), about 30 to 35 turns.
Afterwards, when worn on the wrist,
the watch is automatically rewound.
Fully wound, the watch will keep going
for about 50 hours off the wrist.
,
M
Setting the time
Pull the crown out to position 2. Then
turn the crown downwards ( ) to
move the hands forwards to the
desired time. For accurate time-set-
ting, ensure that the last operation was
done in a clockwise direction. Then
push the crown back to position 1.
After this operation, rotate the crown
downwards ( ) to make sure it turns
freely.
RETROGRADE SECONDS
,