EIBENSTOCK EBS 180 H Notice Originale page 16

Attention!
In case of every stop of the machine or a power cut, the
!
lock-on button has to be released immediately by pressing
the ON/OFF switch. So you can avoid an unintentional
restart of the machine (physical hazard).
Dust Extraction
Dust which occurs during your work is hazardous to health. That is why the
concrete grinder must be used with a vacuum cleaner, and a dust mask
has to be worn. The suitable Wet/Dry Vacuum Cleaner DSS 35 M iP is
available as accessory. It can directly be attached to the connection on the
dust hood.
Instruction for Use
Switch the machine on and put it carefully on the surface you want to work
on. Hold the tool with both hands and work with circular or linear
movements.
For best working results: Don't put too much pressure on the surface you
want to work on.
For grinding works right into edges of the wall one segment of the dust
guard can be removed by means of the chucking device. This allows
grinding on surfaces which are usually hard to reach.
For it loosen both wing screws and pull the segment off (see fig. page 18).
Attention! All other grinding works have to be done with the complete
closed dust guard.
16