Parker Vansco motomit IT Mode D'emploi page 49

Système de contrôle et de mesure pour têtes d'abattage forestières
________________________________________________________________
8.2 Multi-tree handling
Settings
Settings - Operating modes ... Multistemming
MTH function
OFF
MTH function in not in use.
AUTO
MTH function is in use when selected with double tilt-up.
AUTO2
MTH function is in use always. Tilt doesn't release in the felling cut. You have to press tilt down to release it.
MTH-clambs open time in sawing
0 - 2000 ms. MTH-clambs will open this time when making the felling cut.
MTH-clambs open time in tilt release
0 - 2000 ms. MTH-clambs will open this time when the tilt is released.
Rollers opening delay time
0 - 2000 ms. When head close is pressed how long delay is for opening rollers to gather bunch..
Rollers opening time
0 - 2000 ms. Time for opening knives after delay in head close
Keyboards
Scaling - Keyboards
MTH can be set to a programmable key. A press of this key opens the MTH clambs.
MODE D'EMPLOI
11/2005
Page 49