BoomToneDJ Crazy Spot 30 Mode D'emploi page 16

LEd
dISP
Pan
tILt
tESt
vEr
rSET
4. How To Control The Unit
You can operate the unit in three ways:
1. By master/slave built-in preprogram function
2. By DMX controller
3. By included IR remote
4. By sound detection
Master/Slave Built In Preprogrammed Function
The fixture will allow you to link 16 fixtures together and operate without a
controller. In Master/Slave mode, the first fixture will control the others to give an
automatic, sound activated, synchronized light show. This function is good when you
want an instant show. The first fixture it's DMX input cable will have nothing connect
it, and the other fixtures will be set in slave mode automatically. Their DMX input
cables connect the last fixture DMX output cable (daisy chain). Any fixture can act as
a Master or as a Slave
no
on
oFF
dSIP
YES
no
YES
no
10
Black out no
LED display on
LED display off
Display reverse
Pan reverse
Pan forward
Tilt reverse
Tilt forward
Test mode
Version
Reset
16