Table des Matières
Publicité
8
DMX IN
EN
5-pin male XLR socket for connection of a DMX controller (e.g. DMX Mixer).
DE
5-polige männliche XLR-Buchse zum Anschließen eines DMX-Kontrollgeräts (z.B. DMX-Mischpult).
FR
Embase XLR mâle 5 points pour connexion d'un contrôleur DMX (par exemple, une console d'éclairage DMX).
ES
XLR macho de 5 pines para conectar un equipo de control DMX (como una mesa DMX).
PL
5-stykowe, męskie gniazdo XLR do podłączenia urządzenia sterującego DMX (np. pulpitu mikserskiego DMX).
IT
Presa XLR maschio a 5 poli per il collegamento di un apparecchio di controllo DMX (come un mixer DMX).
9
DMX OUT
EN
5-pin female XLR socket for looping through the DMX control signal.
DE
5-polige weibliche XLR-Buchse zum Weiterleiten des DMX-Steuersignals.
FR
Embase XLR femelle 5 points pour renvoi du signal de pilotage DMX.
ES
XLR hembra de 5 pines para reenviar la señal de control DMX.
PL
5-stykowe, żeńskie gniazdo XLR do przesyłania sygnału sterowania DMX.
IT
Presa XLR femmina a 5 poli per l'inoltro del segnale di controllo DMX.
OPERATION / BEDIENUNG / UTILISATION / OPERACIÓN / OBSŁUGA / UTILIZZO
EN
NOTE
When the spotlight is properly connected to the mains, the following information appears successively on the display during the startup process:
"Update Wait..." (for service purposes only), the software version "SOFTWARE V1.xx" and "WELCOME TO cameo". After this operation, the spotlight is
ready for use and changes to the mode that was previously selected.
STATIC COLOUR (STATIC)
This mode offers the ability to separately adjust the intensity for each of the 3 LED groups and to generate an unlimited number of different colours
(colour mixing). Press the MODE button repeatedly until "STATIC" appears in the upper line of the display. By repeatedly pressing the ENTER button,
select the LED group for which you want to change the brightness level (please note the cursor on the display, Rxx = red, Gxx = green, Bxx = blue).
Now you can set the intensity of the selected light from 00 to 99 using the UP and DOWN buttons (example: R00 = red at 0%, i.e. out. R99 = red at
100%, i.e. maximum brightness). Adjust the flash frequency of the strobe effect by pressing ENTER repeatedly until the cursor shows "Fxx". Now
you can activate the strobe effect using the UP and DOWN buttons and set the flash frequency from 00 to 99 (F00 = strobe effect deactivated, F01 =
approx. 1 Hz, F99 = approx. 20 Hz). Confirm with ENTER.
Red
Green
Blue
Stroboscope
COLOUR MACROS (MACRO)
In this mode, one of the 3 basic colours of the spotlight or one of the 12 different mixed colours can be selected as a preset.Press the MODE button
repeatedly until "MACRO" appears in the upper line of the display. Now press ENTER and then select one of the 15 colour presets using the UP and
DOWN buttons. Confirm with ENTER.
MACRO 01
MACRO 02
MACRO 03
MACRO 04
MACRO 05
MACRO 06
MACRO 07
16
Intensity R00 - R99
Intensity G00 - G99
Intensity B00 - B99
Speed F00 - F99
Red
Amber
Yellow warm
Yellow
Green
Turquoise
Cyan
Publicité
Table des Matières
