Lega 4285DB Guide D'instructions page 10

Once uncapped, the frame will be resting on the lower support
tracks.
Push the lower lever forward to remove the frame.
Now you can uncap another frame.
Spacing between the rollers can be increased or reduced by
adjusting the position of the wedge between them accordingly.
Always make sure that the two side guides are at the same
height to keep the rollers aligned.
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
10 / 21