Refco REFMATE Manuel D'utilisation page 18

Bedienungsanleitung REFMATE
17
Connections
See the tab for the
available wireless connections.
Under "Enable" you can activate
the connection.
Use to search for
connections and connect
automatically.
To connect to Wireless
Temperature Clamps, choose in
the Clamps the Clamp names T1
for LP and T2 for HP.
Once connected, devices are
stored and automatically
connected when the wireless
function is switched on.
The number of connected devices
is shown at the top left of the
display. An additional battery
indicator will appear if the
wireless temperature clamp
requires a battery change.
Meaning of the colour display:
Green: Device connected
Yellow: Wireless clamp connected
and temperature sensor plugged
in.
The plugged-in sensor has
priority and is displayed.
Red: Stored device not
connected.
Deutsch