Commissioning And Functions; Commissioning - Refco REFMATE Manuel D'utilisation

Bedienungsanleitung REFMATE
6

Commissioning and functions

6.1

Commissioning

Preparation for commissioning
Insert 4 batteries into the battery compartment on the back. Observe the
correct polarity of the batteries. If you will not be using the REFMATE for a
longer period of time, remove the batteries from the battery compartment.
Remove the protective film from the display
Note: The date and time cannot be changed during the very first 5 minutes.
11
Start device
Press
After a few seconds, the device will
be ready.
Check the battery status
•
Zeroing the pressure sensors
Press and hold
The pressure display shows
•
zero
Deutsch