Before Operation - Aiwa AV-S17 Mode D'emploi

BEFORE OPERATION

To turn the unit on
Press the POWER button.
Operation is possible after four seconds. The VOL (volume) level
or function name is displayed one after the other for the first four
seconds.
The selected function indicator lights up in red.
To change the brightness level of the display
1 Press the ECO button repeatedly until "DIM MODE" is
displayed.
2 Within 4 seconds, press the ENTER button.
3 Within 4 seconds, turn the MULTI JOG to select the dimmer
mode as below.
The mode will be automatically set after 4 seconds. It will
also be set if the ENTER button is pressed within 4 seconds
after step 3.
-
DIM-OFF: The normal display.
DIMMER 1: The illumination of the display is dimmer than
usual.
DIMMER 2: The illumination of the display is dimmer than
DIMMER 1. The function indicator turns off.
Using the headphones
Connect headphones to the PHONES jack with a standard stereo
plug (ø6.3 mm, 1/4 inch). Be sure to set the FRONT SPEAKERS
A and B buttons to hOFF. Otherwise sound is output from the
speakers.
7
ENGLISH
To select the front speaker system
To use speaker system A: Set the FRONT SPEAKERS A button
to HON.
To use speaker system B: Set the FRONT SPEAKERS B button
to HON.
To use both speaker systems: Set both the buttons to HON.
Set the button(s) to hOFF to turn off the speaker system(s).
NOTE
• As the front speaker systems A and B are connected in series:
- The sound will decrease slightly when using both speaker
systems
- No sound can be heard if the FRONT SPEAKERS A and B
buttons are set to HON when only one speaker system is
connected
• The sub woofer sound will be output only when the speaker
system A (the front speakers connected to the SPEAKERS A
terminals) is selected.
To turn the unit off, press the POWER button.
POWER ECONOMIZING (ECO) MODE
Setting this unit to the ECO mode reduces power consumption
as below.
Initial setting of the ECO mode is ON.
• When the current time is set, the clock display disappears
immediately.
• While the power is off, all the display lights turn off, and only
the ECO indicator lights in red.
To cancel the ECO mode
1 Press the ECO button to display ECO MODE while the unit is
turned on.
2 Within 4 seconds, press the ENTER button.
3 Within 4 seconds, turn the MULTI JOG to select ECO OFF.
The mode will be automatically set after 4 seconds. It will
also be set if the ENTER button is pressed within 4 seconds
after step 3.