Connections - Aiwa AV-S17 Mode D'emploi

PREPARATIONS

CONNECTIONS

Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
Connect the speakers, antennas, and all other external
equipment first. Then connect the AC cord at the end.
* 1 Be sure to connect the VIDEO OUT terminal of a DVD player
directly to a TV set, not through this unit. Otherwise, the picture
noise may appear when playing copy protected DVDs.
2
* When connecting a monaural video, use a stereo-mono
connecting cord (not supplied).
DVD or Video 1* /MD player 2
to AUDIO OUT
to VIDEO OUT(Video 1)*
2
Video 2* or
LD/Cable TV
to VIDEO IN (Video 2)
3
ENGLISH
to AUDIO IN(Video 1/MD)
to VIDEO IN(Video 1)
1
o
to AUDIO OUT
o
to VIDEO OUT
o
to AUDIO IN (Video 2)
o
CONNECTING EQUIPMENT
Jacks and plugs of the connecting cord are color-coded as
follows:
Red jacks and plugs : For the right channel of audio signals
White jacks and plugs: For the left channel of audio signals
Yellow jacks and plugs: For video signals
NOTE
Insert the plugs fully into the jacks. Loose connections may
produce a humming sound or other noise interference.
Camcorder
to VIDEO OUT
to AUDIO OUT
o
to AUDIO OUTPUT
o
o
o
to LINE IN
to LINE OUT
Tape deck
FRONT
TV
to VIDEO IN
REAR
CD player
to OUTPUT
Turntable