Hkoenig BW1778 Manuel D'utilisation page 7

2. Install the tap handle connect the tap, make sure both end fit together perfectly.
(Show as Figure 4)
3. Set the water drip tray into the notch provided. (Show as figure 5)
4. Open the beer cooler with 60-80N strength.
Note: Do not connect or disconnect the electric plug when your hands are wet. Before
use it, make sure the voltage is conformity with plug mark, and check whether the
power cord is well connected or not; if not, please don't use it, and call service center;
5. Put 800ml water into the cooling cavity or pour the water to the max mark (Show as
figure 6) (It can work without water, but it can't display the best performance)
Note: Make sure the drain switch is at "Off" position, and no extra objects in the
cooling cavity.