Open the drain switch, water
flow into the S shape drainpipe
from this end
Water flow into drip tray from this
end
1. Open the drain switch to drain out the water from the cavity into the drip tray. Make
sure the drip tray is fit into the notch to avoid water flow to the desk; the drip tray can
load 450ml water;
2. After all water drain out, close the drain switch and put 800ml fresh water into the cavity.
3. Open the drain switch (drag the switch forward to 90 degree angle), and drain
out the water inside the cavity to drip tray, and need twice to drain out the water.
Warning:
1) Clean water is necessary;
2) make sure the drip tray is fit into the notch to avoid water flow to the desk;
3) The drip tray can load 400-500ml water;
CLEANING BEER TAP MECHANISAM
Beer cooler need conformity with hygienically demand, it
need clean before the first use or for long time use, clean
the whole machine with dry cloth. Otherwise two cleaning
way is recommended as following:
1. Load the warm water into the cleaning kit.
2. And connect the end of piercing pin, press the water into
the pin to clean the pin tube, and push the water out from
Move the drain switch to
horizontal line, will start to
drain water
Drip tray
Figure 13